global standard of parameter specifications for surface roughness | |||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Standard Code | ISO468-82 | ISO1302-78 FR standard NFE05-016-78 | CN standard GB1031-68 | CN standardGB1031-63 | GB standard BS1134-72 | US standard ANSIY14.36-78 | JP standard JIS B0601-82 | SU standard ГОСТ | DE standard | ||||||||||||||
DIN3141--78 | DIN ISO1302--80 | ||||||||||||||||||||||
Common Ratio | 1.25:2 | 2 | 1.25:2 | 2 | 2 | 1.25:2 | 2 | 1.25:2 | Symbol | common ratio(2);Ra(μm) | |||||||||||||
Parameter | Ra | Ra | Ra | grade | grade | detailed grading | Ra | Ra | Ra | grade | Ra | Ra | Ra | grade | Ra | serial position | |||||||
Unit | μm | μin | μm | μm | μm | μin | μm | μm | μm | symbol | μm | 1 | 2 | 3 | 4 | ||||||||
Surface Texture/ Roughness (grade and value) | 0.008 | 1 | 0.025 | N1 | ▽14 | ▽14c | 0.0063 | 0.012 | 0.5 | 0.0125 | 0.012* | 0.025 | ▷ ▷ ▷ ▷ |
N1 | 0.008 | without symbol | Requirment for specific surface treatment | ||||||
0.01 | ▽14b | 0.008 | |||||||||||||||||||||
0.012* | ▽14a | 0.01 | 0.01 | ||||||||||||||||||||
0.016 | ▽13 | ▽13c | 0.0125 | 0.012* | S | rough surface, polishing when necessary | |||||||||||||||||
0.025* | ▽13b | 0.016 | 0.025 | 1 | 0.025 | N1 | 0.025* | 0.016 | |||||||||||||||
0.032 | 2 | 0.05 | N2 | ▽13a | 0.02 | 0.02 | |||||||||||||||||
0.04 | ▽12 | ▽12c | 0.025 | 0.025* | |||||||||||||||||||
0.05* | ▽12b | 0.032 | 0.05 | 2 | 0.05 | N2 | 0.05* | 0.05 | N2 | 0.032 | untreated surface, surface cutting and polishing allowed | ||||||||||||
0.063 | 4 | 0.1 | N3 | ▽12a | 0.04 | 0.04 | |||||||||||||||||
0.08 | ▽11 | ▽11c | 0.05 | 0.05* | |||||||||||||||||||
0.1* | ▽11b | 0.063 | 0.1 | 4 | 0.1 | N3 | 0.075 | 0.1 | N3 | 0.063 | |||||||||||||
0.125 | 8 | 0.2 | N4 | ▽11a | 0.08 | 0.075 | 0.08 | Material-removing-treatment is not allowed, unless delivered state is kept | |||||||||||||||
0.16 | ▽10 | ▽10c | 0.1 | 0.1* | 0.1* | ||||||||||||||||||
0.2* | ▽10b | 0.125 | 0.2 | 8 | 0.2 | N4 | 0.125 | 0.2 | N4 | 0.125 | |||||||||||||
0.25 | 16 | 0.4 | N5 | ▽10a | 0.16 | 0.15 | 0.16 | ||||||||||||||||
0.32 | ▽9 | ▽9c | 0.2 | 0.2* | 0.2* | Product has semi-high level of clean but untreated surface | |||||||||||||||||
0.4* | ▽9b | 0.25 | 0.4 | 16 | 0.4 | N5 | 0.25 | 0.4 |
▷ ▷ ▷ |
N5 | 0.25 | ||||||||||||
0.5 | 32 | 0.8 | N6 | ▽9a | 0.32 | 0.32 | 0.32 | ||||||||||||||||
0.83 | ▽8 | 0.63 | 0.4* | 0.4* | |||||||||||||||||||
0.8 | 0.8 | 32 | 0.8 | N6 | 0.5 | 0.8 | N6 | 0.5 | ▷ | 2.5 | 12.5 | 6.3 | 3.2 | ||||||||||
1 | 63 | 1.6 | N7 | 0.63 | 0.63 | ||||||||||||||||||
1.25 | ▽7 | 1.25 | 0.8* | 0.8* | |||||||||||||||||||
1.6* | 1.6 | 63 | 1.6 | N7 | 1 | 1.6 | N7 | 1 | |||||||||||||||
2 | 125 | 3.2 | N8 | 1.25 | 1.25 | ▷ ▷ |
6.3 | 3.2 | 1.6 | 0.8* | |||||||||||||
2.5 | ▽6 | 2.5 | 1.6* | 1.6* | |||||||||||||||||||
3.2* | 3.2 | 125 | 3.2 | N8 | 2 | 3.2 | ▷ ▷ |
N8 | 2 | ||||||||||||||
4 | 250 | 6.3 | N9 | 2.5 | 2.5 | ||||||||||||||||||
5 | ▽5 | 5 | 3.2* | 3.2* | ▷ ▷ ▷ |
1.6 | 0.8 | 0.4 | 0.2 | ||||||||||||||
6.3* | 6.3 | 250 | 6.3 | N9 | 4 | 6.3 | N9 | 4 | |||||||||||||||
8 | 500 | 12.5 | N10 | 5 | 5 | ||||||||||||||||||
10 | ▽4 | 10 | 6.3* | 6.3* | |||||||||||||||||||
12.5* | 12.5 | 500 | 12.5 | N10 | 8 | 12.5 | ▷ | N10 | 8 | ▷ ▷ ▷ ▷ |
0.1 | 0.1 | 0.025 | ||||||||||
16 | 1000 | 25 | N11 | 10 | 10 | ||||||||||||||||||
20 | ▽3 | 20 | 12.5* | 12.5* | |||||||||||||||||||
25* | 25 | 1000 | 25 | N11 | 15 | 25 | N11 | 16 | |||||||||||||||
32 | 2000 | 50 | N12 | 20 | 20 | **:source material stated 1.6,possibly misprinted | |||||||||||||||||
40 | ▽2 | 40 | 25* | 25* | note: when choosing symbols from DIN3141--78, grade number must also be noted above the chosen symbol | ||||||||||||||||||
50* | 50 | 2000 | 50 | N12 | 50 | H12 | 32 | ||||||||||||||||
63 | 40 | ||||||||||||||||||||||
80 | ▽1 | 80 | 50* | ||||||||||||||||||||
100* | 100 | 100 | 63 | ||||||||||||||||||||
125 | 80 | ||||||||||||||||||||||
160 | 100* | ||||||||||||||||||||||
200* | |||||||||||||||||||||||
250 | |||||||||||||||||||||||
320 | 1. Note: Surface roughness without symbol means it has the same symbol given by GB131--83 | ||||||||||||||||||||||
400* | 2.*Priority choice |